Skip to main content
Duette honeycomb blinds on bifold doors in a contemporary dining room

For self-builders, renovators & architects

Before the plasterboard goes up, talk to us.

Some window-shading choices close for good once the walls are plastered. This page picks up where our brochure leaves off, and shows you three easy ways to talk your plans through with us.

The Scottish Shutter Company & Luxaflex®

Expert guidance from Scotland's specialist since 1987

Five Year Promise Established 1987 Edinburgh Design Studio Scotland's Only Luxaflex Gallery Dealer BBSA Accredited Specialist

We catch the window-shading mistakes your architect doesn't know to look for.

"Most design-stage mistakes cost nothing to fix on paper, and a great deal to fix once the plaster's up."

Architects design beautiful windows. We've been dressing them since 1987. We know what happens when a cavity is too shallow for a concealed blind, when there's no motor cable run before the plasterer arrives, or when the reveal depth rules out interior shutters entirely.

A short conversation at the design stage can save you a costly retrofit later. We review your plans, flag potential issues, and make sure every window is ready for whatever shading solution you choose.

What we offer at the design stage

Window Specification Review

We check every window for shading compatibility

Electrical Requirements

Motor cable routes for motorised blinds, before first fix

Cavity & Recess Dimensions

Ensuring space for concealed blinds and shutters

The Pitfalls of Leaving It Too Late

1

Tilt and turn windows

Standard blinds and shutters can't clear tilt-and-turn mechanisms. The window choice needs to account for shading from the start.

2

No provision for concealed blinds

Concealed blinds need a cavity above the window. If it isn't designed in, the ceiling has to come down to retrofit one.

3

Gable windows with no power

Motorised gable blinds need a single cable to a fused spur at the apex. Without it, shading the window gets much harder.

4

Bay windows with uneven reveals

Shutters need consistent plaster depth across the bay. Uneven reveals mean visible gaps or frames that won't sit flush.

5

Awnings and external roller screens

External shading needs structural fixings and power. It's far cheaper to install while the scaffolding is still up.

6

Velux windows in vaulted ceilings

Motorised skylight blinds need power routed to the window before the ceiling is lined. Retrofitting means tearing into the finish.

7

Wrong frame choice for blinds

Some window frames can't accept blind brackets. The glazing bead profile or frame depth may rule out your preferred option entirely.

8

Insufficient reveal depth

Interior shutters need a minimum reveal depth to fold back properly. Too shallow, and the panels block the window when open.

"Every one of these problems costs money to fix after the fact. A conversation with us costs nothing."

Read more: Wiring guide for your electrician · Concealed blinds for architects and builders

Timeless Elegance, Total Control

Interior shutters are made to measure for each window and fitted to it, so they become part of the architecture of your home rather than something hung in front of it.

Styles available

Full height
Cafe style
Tier-on-tier
Solid panel

Why plan early for shutters

  • •Reveal depth must be sufficient for panels to fold back
  • •Bays need consistent plastering for flush frames
  • •Special shapes are measured once plastered, but planned before
  • •Frames can integrate with the window design from the start

Read more: Our shutters · Shutters for patio doors

Full height interior shutters in a modern Scottish home

TruFit vs Perfect Fit

Not all window-mounted blinds are created equal. Here is what you need to know before choosing.

Perfect Fit (Bead Fit)

  • •Metal brackets clip into the glazing bead
  • •Brackets sit against the gasket that seals the unit
  • •Needs a particular bead depth, so it won't suit every frame
  • •Some window warranties exclude alterations or added parts

Worth knowing: plenty of bead-fit blinds are fitted every year without any trouble, and we're not claiming they cause window failures. Our concern is narrower. If a sealed unit ever mists up, hardware sitting in the gasket pocket gives a fabricator somewhere to point. It's worth reading your window manufacturer's terms before you commit either way.

TruFit

SSC Standard
  • •Slim side profiles bonded directly to the glass
  • •Nothing drilled into the frame
  • •Removable without disturbing the sealed unit
  • •Frame, bead and gasket left untouched
  • •Sized to the glass, not the bead, so it suits many more frame types
Luxaflex Pirouette shades in a contemporary living room

Pirouette Shades

Soft fabric vanes attached to a single sheer backing. Pirouette shades give you precise control of light and privacy while maintaining a view through the sheer when the vanes are open.

  • Soft vanes with sheer backing
  • UV protection while retaining view
  • PowerView motorisation available
Luxaflex Silhouette blinds filtering light in a bright room

Silhouette Shades

Floating fabric vanes suspended between two sheer panels. Silhouette shades transform harsh light into a soft, diffused glow while giving you full control of privacy and view.

  • Floating vanes between sheer panels
  • Unique light transformation
  • PowerView motorisation available
Duette honeycomb blinds on tall windows in a contemporary room

Duette Honeycomb Blinds

Duette's honeycomb construction traps air in pockets, creating an insulating barrier at the glass. DECC's 2016 guidance puts around 18% of a home's heat loss through its windows, so that barrier earns its place in a well-insulated new build.

28-34%

Less heat lost through the glass

5-10mm

Side gap (roller: 15-25mm)

A++

Insulation rating, up to (EN 14501)

Sources: DECC home energy factsheets, 2016. 28-34% measured for honeycomb blinds by the University of Salford Energy House for the BBSA (Initial Report, March 2023); percentages apply to the combination of blind and glazing tested; centre-of-glass measurements, initial report.

Perfect for new builds

  • Available in room-darkening and sheer fabrics
  • Top-down/bottom-up operation
  • PowerView motorisation and smart home integration

Why plan early

  • Concealed headbox options need cavity space
  • PowerView hubs need wiring consideration
  • Side channels for maximum light control

Read more: Duette blinds · Motorised blinds

Motorised gable blind covering a triangular window

Motorised Gable Blinds

Triangular and trapezoidal gable windows are one of the most striking features of a new build, but without planning they become impossible to shade. Our motorised gable blinds follow the exact angle of the roofline, operated by remote control or smart home integration.

Electrician note: One cable to a fused spur at the top of the gable, before first fix. That's all it takes.

Read more: Gable window blinds · Gable blind wiring tips

Custom shaped shutters fitted to a gable window

Shaped Shutters

Arched windows, circular windows, and other special shapes can all be fitted with bespoke shutters that follow the exact contour of the opening. We very rarely use paper templates, because folding a template changes its sizes. Instead we take many measurements of the finished opening and build the manufacturing drawing in CAD.

Planning tip: Send us your architect's drawings and we'll confirm what's possible. We measure once the plastering is finished, but the design conversation should happen well before.

Read more: Shaped shutters · Blinds for shaped windows

Awnings & External Shading

Extend your living space outdoors and control solar gain before it reaches the glass.

Luxaflex awning extended over a patio area

Retractable Awnings

  • Motorised, with optional wind and sun sensors
  • LED lighting on selected models
  • Smart home compatible

External Solar Screens

External Roller Screens

  • Block solar heat before it reaches the glass
  • Motorised with wind protection
  • Discreet cassette when retracted
  • Ideal for south-facing glazing

"Get the fixings done while the scaffolding is up. Coming back for them later means paying for access all over again."

Read more: Awnings · External screens · External vs internal shading

Our Work

A selection of recent installations across Scotland

Full height shutters installation
Duette blinds on bay windows
Motorised gable blind
Pirouette shades
Bay window shutters
Duette blinds in a sunny room
Garden patio awning
Silhouette blinds

Our shading experience

Scotland's Window Shading Specialists

The Scottish Shutter Company has been helping people shade their windows since 1987. We're Scotland's only Luxaflex Gallery Dealer, and our Technical Director, David D'Ambrosio, is a Past President of the British Blind and Shutter Association (BBSA).

Shading is all we do: interior shutters, Luxaflex blinds and shades, motorised gable and roof blinds, awnings and external screens. That breadth matters on a build, because the right answer for a gable, a bifold and a north-facing bedroom is rarely the same product.

We educate, not sell. We have no salespeople, and never will. You deal directly with the people who survey, specify and install, and every installation is backed by our Five Year Promise.

"We cannot fault this company, from the idea to completion they were excellent, offering all the options with no heavy sales pressure. Their technical service and installation was first class."
Ian B., Edinburgh · Google review
"We had moved into a new build property and after visiting this company's showroom in Edinburgh were delighted with our choices… The staff are extremely knowledgeable - they are a family company and take great pride in the service they offer and have won awards."
New-build customer, Edinburgh · Trustpilot review
The Scottish Shutter Company team

1987

Established

5

Year Promise

Only

Luxaflex Gallery Dealer in Scotland

Award winners

SME News Scottish Enterprise Awards 2026 winner: Best Window Coverings & Treatments Business BBSA Award Winner 2024 BBSA Award Winner 2022 BBSA Award Winner 2019
  • BBSA Best Internal Shutter Installation (2019, 2022)
  • BBSA Best Marketing Programme (2024)
  • BBSA Highly Commended, Best Independent Design Studio (2024)
  • SME News Scottish Enterprise Awards, Best Window Coverings & Treatments Business (2023, 2025, 2026) and Most Client-Focused Window Shading Solutions Provider (2024)
  • Entrepreneurs Circle Best Family Business of the Year (2020)

Your next step

Talk your plans through with us

Have your drawings to hand if you can. You'll come away with a clear view of what each window needs and when.

David Browne

Option 1

Video call with David

David Browne, our Project Director, works with self-builders, renovators and architects at the design stage. Share your screen or your drawings and he'll go through the windows with you, one by one.

Choose a time in David's diary

Option 2

Meet us at our Design Studio

See shutters, Duette, Silhouette, Pirouette and PowerView motorisation at full size on real windows, and bring your plans along.

Edinburgh Design Studio

67 Ratcliffe Terrace, Edinburgh EH9 1SU

By appointment only, so you get our undivided attention.

Our new Dundee Design Studio opens in early 2027.

Arrange a studio visit

Option 3

Email us a question

Not ready to meet yet? Ask us anything about your build, from reveal depths to cable runs. Use the form below, or email team@scottishshutters.co.uk, and one of the team will reply.

Ask your question

Prefer to phone? Call 0800 852 7385.

Ask us about your build

The more you tell us, the more useful our answer. A few things that help:

  • What stage the build is at (design, first fix, plastering, finished)
  • The window types: tilt and turn, bifolds, gables, rooflights
  • Which rooms face south or west
  • Whether you'd like anything motorised

You're welcome to email drawings to team@scottishshutters.co.uk after sending this.

See our privacy policy.

Want to read more first?

Our 12-page guide, Before the plasterboard goes up, covers the window-shading decisions that are easiest and cheapest to get right during a build. Tell us where to send it and it's on its way straight away.

Written for Self-Builders

Wiring, cavities, reveal depths and shaped windows, before first fix. Looking for our full product range instead? Request our 52-page brochure.

Window Planning Checklist

Download our checklist of the mistakes to catch before the plaster goes up.

Request the Build Guide

Tell us where to send it and we'll email it straight away.

We'll also email you a few times a month with practical tips on shutters and blinds. Unsubscribe in one click any time.
See our privacy policy.

Rocknowe Interiors Ltd trading as The Scottish Shutter Company. Registered in Scotland, company number SC489276, incorporated 2014. Trading continuously since 1987. Registered office: Unit 7 Riverside House, Luna Place, Dundee Technology Park, Dundee DD2 1TP. Telephone 0800 086 2989.

Policies · Privacy · Terms